Topic: ex military mechanics (Read 667 times)

lmao_37 · « **on:** February 05, 2012, 10:58:01 AM »

Are there any ex military mechanics on here iam need some advise on the M35 A2 aka deuce and a half our fire dept has one used as a grass fire truck and just need some info on the wiring harness any help would be very helpful

rodent.22 · « **Reply #1 on:** February 05, 2012, 12:38:56 PM »

sorry Dougie, I was an aircraft mechanic in the Air Force....no help.

techmike · « **Reply #2 on:** February 05, 2012, 03:37:02 PM »

It is not free, but go here http://www.military-manuals.com/military_vehicles_manuals/m35-6x6-2-5-ton-military-truck/m35a1_m35a2_military_truck_manuals_p1.html for the manual, it's $30...
And don't forget the Idaho Motor Pool. http://p8.hostingprod.com/@idahomotorpool.com/index.html

lmao_37 · « **Reply #3 on:** February 06, 2012, 12:38:41 AM »

Thanks TM I have manuals from the forestry service but iam trying to find out about the clearance lights as the turn signals also have sneak/convoy lights and there are the turn signals in there and there is a 3rd bulb in the turn signal and iam going to try and wire them in to the headlamp circuit but iam trying to find out 1 if this will overload the light switch 2nd is there a setting on a switch for this or is there a premade wiring harness for this, I have no formal army training on the M35 but I spent 3 years training in vehicle engineering also army vehicles are so much different than commercial vehicles